What Are Enhanced Services?
In addition to our abrasive blasting and coating services we offer a range of enhancements should your project require them. We are used to working with customers large and small on projects with special requirements and are able to accommodate every need in most applications. For projects that require testing and data-logging, we have the equipment on site.
If your project has special requirements, don’t hesitate to discuss them with our knowledgeable staff. Chances are, we already have experience with your requirements and can exceed your expectations.
Some of the more common enhanced services are listed below.
Surface Profile Testing
Does your specified coating require a precise level of surface profile for optimal adhesion? No problem. We can test and record surface profile to ensure the highest quality results.
|
Dry Film Thickness Testing
Does your specification include a minimum and/or maximum paint thickness? After applying a coating, we can test and record the dry film thickness on each piece of your project.
|
Holiday Testing
Does your project require testing for microscopic perforations in the applied protective coating? We can perform holiday testing to confirm the coating is flawless.
|
Chloride Testing / Removal
Is there a concern about chloride contamination with your project? We can test for and if necessary perform treatments to remove the chloride before it can ruin your project.
|
Temperature / Humidity Tracking
Many types of projects require tracking of the temperature and/or relative humidity when a coating was applied. Just let us know when quoting your project.
|
Data Logging / Tracking
Maybe you have accepted a contract that requires data logging or perhaps you need it for your own purposes. Either way, when measurements are required, we will provide accurate logs.
|
Rust Inhibitor Application
Picking up your project after blasting while it is still bare metal? We can apply a 14 day rust inhibitor to protect your investment from flash rust caused by humidity.
|
Oil / Mold Release Application
If your project requires oiling or the application of a specific mold release, we’ve got you covered.
|
Iron Phosphate Pre-Treatment
A.K.A. phosphatizing is a pre-treatment to coating that provides better adhesion and better corrosion resistance. We maintain an eco-friendly phosphatizing booth on site.
|
Assembly / Disassembly
If your project requires assembly and/or disassembly, we can perform these tasks so all you have to do is drop off your project and pick it up when it is finished.
|
Product Packaging
Commonly used for projects with a high quantity of small parts, we can return your project to you individually boxed and even labeled.
|
Minor Welding Repairs
When your project requires welding repairs, our on-site service shop staff will carry out the repairs. Let us save you the trouble of making an extra stop for welding services.
|
Pressure Wash
We offer pressure wash services for projects that either need to be cleaned prior to starting work or to clean ash from thermally cleaned items that do not require follow up blasting or paint.
|
|
|